Prochem Blazer GT Manuale Utente Scaricare il pdf (Pagina 36)

Operations

Winterizing the Unit

1. Shut off the water supply. Disconnect the water

inlet hose from the front of your console.

2. Connect all high pressure solution hoses and tools

that may have water in them.

3. Start the unit. Open the tool valve until water pres-

sure drops and water stops flowing.

4. Turn off the engine.

5. Fill the water box with approximately two gallons of

100% glycol base anti-freeze.

6. Start the unit.

7. Open the tool valve until anti-freeze begins to

come out of the tool. Recover ALL anti-freeze that

comes out of the tools into an approved container.

We strongly recommend that you re-cycle and re-

use the anti-freeze.

Repeat this procedure with all the remaining tools. After

all tools and pressure hoses have been filled with anti-

freeze, disconnect and store them.

8. Turn off the unit. Attach the winterizing loop hose

with attachment, Part #86260700, to the solution

outlet connection and the water inlet connection.

9. Start the unit and allow it to run for approximately 3

minutes with the winterizing loop hose attached.

10. Open temperature control valve and allow anti-

freeze to flow to waste tank.

11. Prime the chemical system with 50/50 anti-freeze/

water mix. Insert the chemical inlet and prime dis-

charge tubes into the anti-freeze container. Turn

the chemical valve to PRIME until anti-freeze

begins to flow out of the prime hose.

12. Turn the chemical valve to the open position,

making certain that the flow meter indicates flow

and that all anti-freeze drains out of the chemical

hose into an approved container, after 30 seconds,

turn off both valves.

86317260 BLAZER GT

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 131 132

Nessun commento

Prochem Blazer GT Manuale Utente Pagina 36